Ph.D., Department of Precision Instruments and Mechanology, Tsinghua University, China, 1990

B.S., Department of Precision Instruments and Mechnology, Tsinghua University, China, 1981

Department of Mechanical Engineering, Tsinghua University, Professor, 2013-Present, full time

Department of Precision Instruments and Mechanology, Tsinghua University, Professor, 2003-2013, full time

Department of Precision Instruments and Mechanology, Tsinghua University, Associate Professor, 1991-2003, full time

Department of Precision Instruments and Mechanology, Tsinghua University, Lecturer, 1990-1991, full time

Cybernetics and control theory

Motion control

Numerical control technology

Automation of mechatronics systems

[1] Jiang Wenxue, Zhou Kai, Lv Jiangwei, et al, Superconducting EMS feed drive system of NC machine tool, The International Journal of Advanced Manufacturing Technology, 2014, 74(5-8): 1053-1060

[2] Zhan Lixin, Zhou Kai, Field-programmable gate array based fuzzy sliding-mode controller for a permanent magnet synchronous motor drive, Electric Power Components and Systems, 2014, 42(13): 1-12.

[3] Jiang Wenxue, Zhou Kai, An optimized SVM-based hysteresis current controller. 2014 IEEE International Conference on Industrial Engineering and Information Technology, 2014

[4] Zhan Lixin, Zhou Kai, Adaptive fuzzy sliding mode control for a robotic aircraft flexible tooling system, International Journal of Advanced Manufacturing Technology. 2013, 69(5-8): 1469-1481.

[5] Zhan Lixin, Zhou Kai，Research on dual-robot synchronous control of aircraft flexible tooling system with fuzzy sliding mode control, Advanced Material Research, 2012, (05), 943-948

[6] Lu Junbai, Zhou Kai, Multi-point location theory, method, and application for flexible tooling system in aircraft manufacturing, The International Journal of Advanced Manufacturing Technology, 2011,54(5-8): 729-736

[7] Lu Junbai, Zhou Kai, Multi-point location/support algorithm used in flexible tooling system for aircraft large-scale thin-wall workpiece, International     Workshop on Mechanic Automation and Control Engineering 2010

[8] Men Yanwu, Zhou Kai，Research on wireless control system for intelligent flexible tooling system of aircraft, ACTA AERONAUTICA ET ASTRONAUTICA SINICA, 2010,31(2): 377-387

[9] Lu Junbai, Zhou Kai, Zhang Bopeng, Research on optimization of location/support array of flexible tooling system for aircraft large-scale thin-wall workpiece, China Mechanical Engineering, 2010, 21(19): 2369-2378

[10] Zhou Kai, Wang Guanjun, Jin Houzhong, Tan Zhongyi. NURBS interpolation based on exponential smoothing forecasting. The International Journal of Advanced Manufacturing Technology, 2008, 39(11): 1190-1196